|
Usuarios conectados
Actualmente hay 5137 visitantes online.
|
Productos
|
Información
|
Destacado
|
|
|
|
|
No hay comentarios de productos.
Technical Manual
MS-1 Modulus Satellite
EXPLODED VIEW
15 2 3 4 5
®
®
14
13 12
6 11
20
7
10 9
8
ITEM NO. DESCRIPTION 1. Whole Sat, less base, Charcoal Whole Sat, less base, Platinum 2. Woofer 3. Baffle, Char. Modulus Sat Baffle, Plat. Modulus Sat including trim panels 4. Trim panel, with silkscreen logo Char. Trim panel, with silkscreen logo Plat. 5. Complete grille with cloth, Charcoal Complete grille with cloth, Platinum 6. Grille cup, rubber, Charcoal Grille cup, rubber, Platinum
QTY. 1 1 1 1 1 1 1 1 1 4 4
PART NO. MODSATCHAR MODSATPLAT MODSATWFR or 336545-002 MODSATBAFFCHAR MODSATBAFFPLAT MODSATDECCHAR MODSATDECPLAT MODSATGRCHAR MODSATGRPLAT MODSATGCUP or 336880-002 MODSATGCUPPLAT
ITEM NO. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20.
DESCRIPTION QTY. Wall cleat, steel 1 Whole assembled base, Charcoal 1 Whole assembled base, Platinum 1 Foot pads 1 Hex wrench 1 Rubber-coated ball 1 Tweeter 1 Network Red binding post Black binding post Owner�s Manual Survey Card Warranty Card Leveling bubble Rubber cover
00530
1 1 1 1 1 1 1 1
PART NO. MODSATCLEAT MODSATBASECHAR MODSATBASEPLAT MODSATFT MODSATHEX MODSATPLUG MODSATTWT or 336417-001 MODSATNET MODSATBP-R MODSATBP-B 336782-001 335868-002 335841-001 MODSATBUBBLE MODSATTCOVER
Infinity Systems, Inc., 250 Crossways Park Drive, Woodbury, New York 11797 Rev 0 08/2001
MS-1 Modulus Satellite
TO SERVICE THE MODULUS MS-1 SATELLITE 1. Remove the grille. 2. Remove the (4) exposed rubber grille retainers; this can be accomplished by carefully pulling them out of their cavities with long-nosed pliers or similar tool. 3. Remove the (4) Phillips screws that are now exposed. 4. Two additional screws lie underneath the front trim panel; this can be carefully removed by applying a blow dryer (high or maximum) or heat gun to the trim panel. Take care not to direct the gun directly at the woofer or tweeter; do not burn yourself after the panel has been heated � gloves are recommended. See illustration. If this trim panel is damaged upon removal, order: part# MODSATDECCHAR (Charcoal) part# MODSATDECPLAT (Platinum) 5. Remove the (2) additional Phillips screws that are now exposed. 6. Carefully lift the front baffle, with drivers attached, off the cabinet. 7. Reassembly: Adhesive already in place, if encrusted on the front baffle, must be removed by scraping it off as it may prevent the trim panel from sitting flush on the front baffle. New adhesive must be added to reattach the trim panel.
|
|
|
> |
|